Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ looking for plate that goes on deadbolt ”

RELATED FAQS

Question
Answer
What is the replacement for the Locknetics 9100 series electric strike?
The Locknetics 9100 series electric strikes are replaced with Von Duprin 6211 and 6210 electric strikes.   The 6211 is used if the frame is being replaced. The 6210 is for ...
What size is the Schlage H escutcheon?
  Schlage H-Series Escutcheons    Part Number  Description Dimension   07-057  Inside escutcheon and turn  6.92" x 2.75"  07-035  Inside escutcheon, dummy - H170  6.92" x 2...
Is there a round corner armor front for the L series mortise lock?
The L series armor fronts are only available with square corners.  
Did Falcon ever make a lock for elevator doors?
Falcon manufactured an EZF101 which was a large plate with a recessed lever for use in elevators.  This item is no longer available.     
Is there a B250 series lock with a blank plate on the outside?
No such product exists.
What replaced the D871 deadbolt?
The replacement for the D871 is the D271.  None of the parts are backwards compatible. D271 description:Thumbturn x Occupancy Indicator Deadbolt thrown or retracted by turn unit only. ...
The Falcon D400 and D800 series (including the D871) were discontinued in 2008.
What is the standard backset for the ND locks?
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.