Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lx kit support rim exit device ”

RELATED FAQS

Question
Answer
What back plate conversion kit is required for the 88 with the 373L trim?
Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...
Can the CD and EL options be provided on the same 98 /99 rim or vertical rod exit device?
There is not enough room for both options as the dogging mechanism in a standard cylinder dogging and the electronics for the EL or QEL options are both located at the end of the base plate. For 9...
How do you mount a 55 rim with the 379 where the studs do not line up with the mounting screws?
Position the 379L  trim and attach with countersunk screw into the bottom stud of the trim.  Position the 55 Rim device and attach with the device mounting screw through the head of th...
Is the Von Duprin 6111 electric strike compatible with Von Duprin XP98/99 rim exit device?
This is not a recommended application as the electric strike does not have the same holding force as the XP98/99 rim exit device. The electric strike has 1500 pounds of holding force whereas the XP...
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: Remove ...