Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LX WITH CHEXIT ”

RELATED FAQS

Question
Answer
Can the Von Duprin Chexit device be ordered with LX latch bolt monitor?
The LX switch is not available with Von Duprin rim and vertical rod Chexit devices. If using a mortise Chexit device the SS7500 mortise lock would provide a LX latch bolt monito...
Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?
The hole should be drilled in the field once the end cap is located on the door.  It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...
Can the Chexit 98/99 be used with the E996 lever trim?
You can use the E996L electric trim with Chexit 98/99 series exit device.
Is the the PS914 EL wiring adapter needed for Von Duprin Chexit device?
The EL Wiring Adapter is not needed for a CX device.
Do you have a micro-switch with orange wires?
The micro-switch with two orange wires is probably the Chexit switch assembly for devices shipped prior to 8-24-2015 with solenoid driven, part number 13-065-00. 
Why is my Von Duprin CX going into a weak alarm after the rearm delay?
Chexit devices shipped prior to 8-24-2015 with solenoid - the solenoid pulls and drops, the alarm sounds, there is a solid LED or no LED light after the rearm t...