Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ minimum exit device length ”

RELATED FAQS

Question
Answer
How far down can an exit device be cut down in the field?
For most exit devices, please refer to the specific device series catalog for minimum door opening width the device can be cut down to fit.   Be aware that some device options, frame...
Can a door have an InPact device and glass lights?
Yes, glass light can be used or prepped in conjunction with the Von Duprin 94/95 Series INPACT device however there are dimensional limitations between the glass light and the InPact door preparati...
Glass lights available: Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification. Glass Light Options - Other glass lights are available but ...
Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?
The Von Duprin 994L series trims were square on top and bottom.  They were discontinued in July 2010.
What causes the top rod case to pull away from or strip out of the face of a steel door?
Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...
Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?
Installation should be 6" from bottom of the door. See attached templates as reference.  T-5494 for HM Doors W-5494 for Wood Doors