Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ minimum stile size l series locks ”

RELATED FAQS

Question
Answer
What are the dimensions of the L series lock case?
Lockcase dimensions (depth x height x width) are: L/LV9000 -  4 7/16" x 6 1/16" x 1" L400 -  4 7/16" x 3 5/8" x 1"
What is the minimum rose dimension that can be used with a Steelcraft 61L lock preparation?
The minimum rose that can be used on the 61L (ANSI/BHMA A156.115.18) preparation is 3 7/16". Steelcraft's 61L lock prep (often referred to as the "Squashed Turtle lock prep") is designed for Bored...
What are the minimum stile and rail dimensions for the L-Series door FG, FG2 & FG3?
The minimum stile and rail dimensions are to exposed glass are: Stiles = 6 13/16" Top Rails = 6 3/4" Center Rails = 7 1/2" Bottom Rail = 10 3/4" For high traffic and high abuse locations th...
Stile Size
The minimum recommended Stile measurement is 5” to allow proper mounting of the AD and CO series locks.
What is the minimum stile dimension on the A14-Series door?
The minimum stile and rail dimensions with glass trim are as follow: Top Rail: 6 1/4" top of door to exposed glass or 5 1/2" top of door to cutout Center Rail: 6 1/2" exposed gla...
What is the minimum stile for Schlage locks?
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width.  See the Schlage Minimum Stile Requirements for the minimum stile for eac...
What is the minimum stile an MA lock can fit?
Depending on the door construction the minimum stile may differ but a safe dimension would be 4-3/4".  CUSTOMER must check door construction. The pocket depth requirements of the case is 4 1/2".
What is the minimum dimension from the edge of the door to a glass light cutout?
Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...