Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortice deadlock and cylinder ”

RELATED FAQS

Question
Answer
D221
Cylinder deadlock - Deadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown.
D231
Double cylinder deadlock - Deadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown.
D241
Single cylinder deadlock with turn - Deadbolt thrown or retracted by key or by turn. Bolt automatically deadlocks when fully thrown.
What is a deadbolt?
Deadbolt Locks (Deadlocks): a lock with a bolt which requires a deliberate action to extend and which resists end pressure in the unlocking direction when fully extended Medium, high to extra he...
What is the tailpiece and driver part number for the 20-057?
The B220-001 is an FSIC rim tailpiece and driver.
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
What is the Falcon cam designation for use on 25 series trims?
For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam 
What are the part numbers for the ND lock spring cages?
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages:
What does the hotel indicator look like for the A, AL, D, and ND?
Indicator not extended Indicator extended
The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed.  When this pin is pr...
How do you specify cylinder dogging for mortise cylinders?
When ordering dogging with cylinder; specify complete cylinder with appropriate option below:XQ11-949 for all conventional cylinders  XQ11-948 for full size and small format IC cylinders
XQ11-947 was used Classic conventional cylinders prior to the release of modular - NOW OBSOLETE
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.
What is a modular cylinder?
Click here for the Schlage Modular Cylinder Marketing Sell Sheet for information on the modular cylinder.
Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?
Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...
What is the L9066 XL11-897?
L9066 x XL11-897 Storeroom Lock  Key in either cylinder locks or unlocks both levers. When locked, latchbolt retracted by key either side. Specify per XL11-897 with the lock function when or...
What is the part number for the blocking ring for use without compression ring?
The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).
Does Schlage offer a cam that will work with a Yale mortise lock?
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.     Schlage Cams for Yale 2160  Part Number  Description  B520-7...
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
What mortise cylinder cam do I use on a Falcon MA lock?
The Falcon MA-Series requires a different cam for keyed functions than its predecessor the Falcon M-Series.
 
 
How do I change the hand on the 09-900 cylinder turn?
The 09-900 mortise cylinder thumbturn has three handing options: right hand, left hand, and non-handed.  Handing of the cylinder is done by a check ball and spring placed in the housing a...
Also applies to the 09-900 XL12-196 mortise cylinder coin turn.
Is a mortise cylinder coin turn offered?
Coin turn will need to be on a separate line item, specify 09-487 x length (118, 114, 138).This cylinder coin turn is non-handed so it can rotate freely in both directions.
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Schlage now offers modular style cams to operate the Falcon MA locks.  The following part numbers are cams for all MA locks (except the MA381): L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Price Book 72A List Price $8.10
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference:  
How do I change the hand of a hotel cylinder?
Standard and Full Size I/C mortise cylinders on the L9485 and L9486, Hotel or Restroom Locks, use the concept of a ward ring to lock out all change keys once the deadbolt is thrown. Instead of a fu...
HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation.  Right hand shown below.
What is the part number for the L9000 product thumbturn cylinder?
See table below for part numbers. Table 1: 09-900 part number variations