Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ MORTISE CYLINDER IN L SERIES ”

RELATED FAQS

Question
Answer
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference:  
What are the part numbers for the inside and outside knobs for the L series?
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish
What parts are needed to install an L lock on an 1 3/8" door?
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped.  The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...
Is there a round corner armor front for the L series mortise lock?
The L series armor fronts are only available with square corners.  
Can you order the Schlage L series mortise lock with knob on one side and lever on the other?
You can order an L lock with a lever on one side and knob on the other as long as it's still rose by rose, or escutcheon by escutcheon (must be same style escutcheon). EXCEPTIONS: Knob trim o...
Includes the SL1 lever on one side and the SK1 knob trim on the other side.
Is the L-Series mortise lock UL rated?
UL Listed for 3-hour fire door (except L9076 and L9077)
How long does it take to install a L Series mortise lock?
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes.  Many outside variables can change the amo...
Available kits to convert classroom mortise locks to classroom security locks.
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...