Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise cyliner cam ”

RELATED FAQS

Question
Answer
What is the part number for the dogged cam used in modular cylinders?
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.
What type of cylinder is the 20-001?
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
Can the modular cams be used on the older cylinders?
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...