Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mounting heights for acuators ”

RELATED FAQS

Question
Answer
What is the ANSI recommendation for the distance between the actuator and the door opening?
Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...
Why does the the 9954 mullion have taller bottom fittings than the 4954?
Bottom mounting fitting on 9954 is taller than 4954. The taller bottom fitting is required for a fire rated application.
What are the dimensions for mounting a 1261 on the pull side of the door
http://lcnclosers.com/pdfs
What are the dimensions of the SC70 footprint
The measurements from center line to centerline of the mounting holes are 2-3/8"  x  6-3/4".
What is the mounting difference between a 2010 closer and a 2030 closer?
The 2010 and 2030 closer are not the same. The 2010 Series closer uses the (larger) 4010 cylinder which requires a 4" minimum frame tube to mount in. The 2030 uses the (narrow) "Pacer" cylinder...
Do we have a maximum door width or height for using pivots?
The maximum door width that pivots have been tested is a 4' wide door.  Any door greater than 4' would shorten the life of the pivots. There is no maximum door height, for offset pivots the ru...