MT Reader smart card compatibility

RELATED FAQS

Question
Answer
The MT and MTK reader heads for the AD-series locks will ONLY read the public CSN of iClass cards, which with SEOS means a different random CSN every time the card is read. Recommendation: Use Si ...
Information on low battery threshold and nuisance delay is noted below: New firmware now has improved levels. - These are approximate values/levels which change with measurement meters and measure...
AD400/AD200/AD250 After ADFwPkg 2.17.0 - June 2011 4 Battery Holder New batteries = 6.2 VDC Low battery threshold is 4.7 VDC for SM & MT - and 3.7 VDC for MAG and PROX (USB stops working at 4...
    AD400/AD200/AD250 After ADFwPkg 2.17.0 - June 2011 8 Battery Holder New batteries = 12.4 VDC Low battery threshold is 7.2 VDC Critical battery threshold is 6.9 VDC Coin cell = new/...
CO2004 Battery Holder (ONLY) New batteries = 6.2 VDC Low battery threshold is 4.2 VDC Critical battery threshold is 3.9 VDC Coin cell = new/full is 3.0 VDC, low is 2.8 VDC
CO2504 Battery Holder (ONLY) New batteries = 6.2 VDC Low battery threshold is 4.2 VDC Critical battery threshold is 3.9 VDC Coin cell = new/full is 3.0 VDC, low is 2.8 VDC
  CO200 & CO250 Disable coin cell Nuisance delay and blink, With CO.A.7 and SUS 4.10.2 or newer for CO200 and CO250, you can use the SUS/HHD, under Lock Properties, Edit, to de-select, DISABLE, t...
It will read Corp 1000 iClass. If it's MiFare, it will not read the Corporate 1000 side of the card. We cannot read HID MiFare secure sector.
The firmware on the SM10 is the same as the MT-series readers, except only the X14 firmware package is loaded.
 Yes.  You need to establish sync with new MT. To establish a reader connection: Push and release the CTE SCHLAGE button, followed by two quick pushes on the FDR button. ...
MTB and MTKB (bluetooth credential enabled) readers are not compatible with PIV or FIPS smart cards. If PIV compatibility needed, recommend use MT or MTK readers (non-B versions).