Hinge Spacing: All 4 1/2" and 5" butt hinge spacing
1. Opening heights 3'0" through 4'11 15/16" (one pair butt hinges)
from under head CL 9 3/4" (top of door 9 5/8")
from bottom of frame ...
Hinge Backset:
On the frame = 5/16"
On the door = 1/4"
Lock Spacing: All standard bored locks ANSI 115.2 (161, 61L type), for mortise lock ANSI 115.1 (86 type) all locations must be altered 3/8" lower, and standard strike (ASA type).
1. Opening ...
The location to the top of hinge will vary depending on hinge size used.
6'8" Frame with 1 1/2 pair of hinges (top to top):
For 4 1/2" hinges from the head to top of each hinge is 7 1/2", 37 7...
Fire labels (UL, ITS/WHI or FM) are located as follows:
Butt Hinges and Pivots:
On the doors the fire label is located on the hinge edge between the top and 2nd hinge preparation.
On the fram...
It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documentsClick here to get the updated link to the Steelcraft Shop M...
Communicating Frames are hollow metal frame fabricated such that a door is installed in each rabbet of a double rabbeted frame (2 doors total) to facilitate dual access and control of the opening, ...
FastTrack is a quick ship stock program which includes targeted
Builders Hardware SKUs offered by Allegion Distributor Partners. FastTrack order
forms and supporting information is available only t...
Allegion Employees can access the distributors’ “My Allegion
Portal” thru The Frontline Home Page:
Click on “My Allegion
Distributor Portal” located in the navigation menu on the left si...
POCKET DOOR FRAME: A frame designed to allow a door to slide inside a pocket located within the cavity of a wall.
The hinge jamb of the frame is replaced with a 2 piece jamb without a stop.
I...
Hospital Stops are located at the bottom of the frame jambs and/or mullions. The integral door stops are terminates above floor line and is closed with a 45° or 90° angle to facilitate cleaning at ...