ND Function numbers

RELATED FAQS

Question
Answer
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...
The Von Duprin EL option can be added to any existing 33A/35A, 98/99 series exit devices. 
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
L9496 is a Privacy mortise lock with “Occupied” Indicator. Knob/lever retracts latchbolt from either side. Deadbolt thrown or retracted by key outside (retraction by key required in the event ...
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
A flat head screwdriver can be used or the 35-250 emergency key.
ND66PD (ANSI F91) Store Lock  Key in either lever locks or unlocks both levers. Key in either lever locks or unlocks both levers.
L9050 LV9050 (ANSI F04) Entrance/Office Lock  Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is l...
CLASSROOM LOCK: A lock that locks and unlocks the outside lever with a key.  Inside is always free egress. ENTRY LOCK:  A lock that locks and unlocks the outside lever with button/turn on the insi...
L9071 LV9071 (ANSI F32) Classroom Security Lock  Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door...
ANSI F84 Classroom Lock  Outside lever locked and unlocked by key. Inside lever always unlocked for immediate egress.   ANSI F86 Storeroom Lock  Outside lever fixed. Entra...
Apartment Corridor Lock function is defined as a lock where the latch bolt operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than...
Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt ...
Conversion kits are available to convert many popular functions.Conversion kits manufactured on or after January 30, 2017 will have the new enhanced ND spring cage, lever, plunger and buttonCo...
For all available ND Series Conversion Kit part numbers, click here.
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
Beginning March 14th, 2016, the electrified ND (ND12EL/EU; ND80EL/EU; ND96EL/EU) begin shipping with a new motor driven design which does not use an AC rectifier. (CAN NOT USE AC VOLTAGE WITH ...
The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...
In order to change functions between an L9050 and an L9056 a new lock body would be needed.     The lock body part number for an L9050 is L283-133. The lock body part n...
In late July, 2014, Schlage began taking orders for a new high visibility indicator for both N escutcheon and sectional trim applications.  A complete listing of lock functions and part number...
The L Series mortise indicator datasheet can be found here. Includes how to order.
L283-263 and L283-239 are obsolete part numbers that were used to specify "request to exit" on the L9000 and LV9000 locks. To specify RX on L9000 locks after January 2, 2017, specify the lette...
Lubriplate is a grease that can be used for our locks and is available in the price book for purchase, M204-168.  
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
In early 2013 the ND85 plunger assembly was improved to prevent accidental rotation of the inside button.  The previous design could allow someone to unintentionally rotate the button and unknowing...
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes.  Many outside variables can change the amo...
The Schlage ND electrified locks can be ordered with a 3-3/4" backset, but the latch cannot be ordered separately because of UL regulations.
D73PD or ND73PD (ANSI F90) Corridor Lock    Locked or unlocked by key from outside. Push-button locking from inside. Turning inside knob/lever or closing door releases button.
ND53PD (ANSI F109) Entrance Lock  Turn/push-button locking; pushing and turning button locks outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing bu...
SCHLAGE locks are available with the following backsets: Lock Series Lock Type                 ...
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages:
03-042 is the part number for the inside or outside rose.
L9040 locks WITHOUT indicator uses an emergency tool available in the price book, L583-233.L9040 locks WITH an indicator requires a small flat blade screwdriver.
The L583-233 emergency key spindle length is 1.575"The L583-233 emergency key will operate on a door thickness up to 3" extended equally. 
BHMA provides a certified products directory complete with function codes and meanings from most of the major lock manufacturers.  The most up-to-date directory can be accessed through th...
Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards:   Cylindrical, Bored and Preassembled Locks & Latches   8...
The Schlage Vandlgard option available on select L-Series, LV-Series, and ND-Series and is ideal for areas subject to abuse or anywhere vandalism is likely to be present, such as schools, univ...
Vandlgard is specified by "LV" for mortise locks. The L9000 is a mortise style lock that mounts into a pocket mortised into the edge of the door.Vandlgard is specified by ND9x functions f...
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.     Schlage Cams for Yale 2160  Part Number  Description  B520-7...
The storeroom lock function is described as follows: Latch bolt operated by key from outside or by operating inside lever. Outside lever is always inoperative. The following are storeroom functi...
Refer to table 1 for the list of Schlage AL-Series cylinders.     AL-Series Cylinder Reference Table    Function  Cylinder Mechanism   Complete Cylinder   Non-Hotel Functions  ...
ND82PD (ANSI F87) Institution Lock  Both levers fixed. Entrance by key in either lever.
ND93PD (ANSI F88) Vestibule LockLatch retracted by key from outside when outside lever is disengaged by key in inside lever. Inside lever is always unlocked.  ND95PD (ANSI F110) Classroom Securit...
ND85PD (ANSI F93) Faculty Restroom Lock  Outside lever fixed. Entrance by key only. Push-button in inside lever activates visual “occupancy” indicator, allowing only emergency master key to ...
Swapping out the following parts of an ND50 will convert it to an ND53: Swap N123-028 Push button plunger for  N123-017, Push and Turn button plunger Swap N523-000, Push button for N523-001 Pus...