Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd lock removal ”

RELATED FAQS

Question
Answer
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
Why can't I remove the control key from the core after the core is inserted into the lever?
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
How can I tell if I have a new ND lock or the previous design?
ND locks shipping on or after January 30, 2017 will look very similar when assembled to their predecessor that shipped prior to that date. There are several ways to distinguish the old versus the n...
When ordering the ND lock less cylinder will it come with a tailpiece?
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.
How do you order the ND series lock with a small format core?
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core
How to convert a ND series lock cylinder format from PD to BD?
On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...