The backset is the same for the 6300 surface mounted electric strike as it is when using the 299 strike. There should be 3/16" from the face of the device and the face of the strike.
The backset is 2 3/4" from edge of door to the center line of the device and strike.
The preparation for the WS98/99 strike must be specified when placing order for the frame.
A and AL product: Must use the 2 3/8" backset with the 41-005 extension link
D Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link
Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to b...
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4".
The latch supplied is the 13-047 deadlatch and 13-048 springlatch.
Hinge Spacing: All 4 1/2" and 5" butt hinge spacing
1. Opening heights 3'0" through 4'11 15/16" (one pair butt hinges)
from under head CL 9 3/4" (top of door 9 5/8")
from bottom of frame ...
Hinge Backset:
On the frame = 5/16"
On the door = 1/4"
Lock Spacing: All standard bored locks ANSI 115.2 (161, 61L type), for mortise lock ANSI 115.1 (86 type) all locations must be altered 3/8" lower, and standard strike (ASA type).
1. Opening ...
The Falcon 25R rim device can be used with 6111 electric strike on single or double doors.
Additional Information:
The Von Duprin 4854/9854 mullion is required when using 25R...
For the backset see the Falcon (F)25-R template; T-1201 for Metal Door, W-1201 for Wood Door.
For Single Doors, the distance from the surface of the raised stop to the Centerline of the device is...