Only the Schlage ND-Series can be prepped to accept non-Schlage cores.
All designs are supplied with the appropriate tailpiece
Non-Schlage cores are NOT included
Lever designs available vary d...
ND-Series Cylinder Reference Table
Function
Door Thickness
Cylinder Mechanism
Complete Cylinder
Non-Hotel Functions
Standard
Conventional
23-065
Primus
20-765
Pri...
On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...
There is not enough room for both options as the dogging mechanism in a standard cylinder dogging and the electronics for the EL or QEL options are both located at the end of the base plate.
For 9...
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
Medeco does offer a key-in-lever cylinder to fit the Schlage ND.
You will need to contact Medeco for the cylinder
Specify a key-in-lever cylinder to fit the Schlage ND lo...
Standard 98/99 exit alarm ALK devices are available with cylinder dogging option as of October, 2011.
The device can be ordered standard with cylinder dogging and exit alarm ALK opti...
The device is not available with cylinder dogging, but the outside cylinder assembly on the pull side of the door can be set for a hold back function (instead of nightlatch function), which essenti...
Even with the cylinder collar omitted, the cam on a 1-1/8" cylinder would fail to connect properly with the dogging actuator. For this reason, a 1-1/4" mortise cylinder must be used.