Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ND SERIES EPT ”

RELATED FAQS

Question
Answer
What backsets are available on Schlage and Falcon locks?
SCHLAGE locks are available with the following backsets: Lock Series Lock Type                 ...
What type of switch is used for the RX and latch monitoring options for the ND and L locks?
The ND-Series RX,  the L-Series RX and latch monitoring switches are Form C - Single Pole Double Throw (also known as SPDT).
What is the part number for the ND solenoid?
The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
How to convert a ND series lock cylinder format from PD to BD?
On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...
Why is the ND lever hard to push on?
ND locks shipping on or after January 30, 2017 no longer require the use of the soft durometer spacer. Lever installation on the redesigned ND locks should not be difficult.
For ND locks shipping prior to January 30, 2017, the addition of the soft durometer spacer (SDS) on August 15, 2012 did affect the installation of the lever.  Ultimately, removing th...