nl-op instalation manual

RELATED FAQS

Question
Answer
You would have to order the device as 88NL less trim, the device will be shipped as an 88EO.  The EO device has an NL cam to accept a rim cylinder tailpiece. 
Device would be ordered as a 25C-C as of June 2012. C nomenclature is for the Cylinder. 
This option is not available as there is no NL cam to directly drive the rods and using a key to lift the heavy stainless, brass or bronze rods would damage the key. 
This is possible.  A rim cylinder with cylinder anchor plate is used (anchor plate provided with rim cylinder package). No other special components are required. Order device as NL-OP.&...
The 388 Cylinder Control is required for the NL-OP function on a 33A/35A series exit devices. The 110NL is used on 22 and 98/99 series exit devices not 33/35A series devices.
For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM.  We will furnish a device only, and the mortise cyl...