no tour credential update

RELATED FAQS

Question
Answer
A reader powered by a USB cable (via a computer's USB port or a powered USB plug) used to enroll smart credentials used in Multifamily access. The reader uses a Wi-Fi connection for enrolling no-...
When new product(s) are added to an existing installed customer site, all devices at that site should be updated to the latest firmware revision that is available for the most consistent user exper...
Whenever an AD Series credential reader is upgraded with new or different credential types or replaced in the field, be sure to update. Lock firmware and reader firmware are packaged together so ...
Search the product library for firmware associated with your installed product to obtain the latest updates.  
Go to the Schlage support site to download the latest firmware package  - www.schlage.com/support  
Steps to determine what firmware version your products are currently using AND if a firmware update is suggested:1) Use the Hand Held Device (HHD) and Schlage Utility Software (SUS) application to ...
On power-up the CO-Series locksets will provide 5 quick RED Schlage Button flashes and 5 quick beeps to indicate that the electronics (credential reader) has been changed.  In order to recover...
When/If the electronics (Credential Reader) changed on a CO-Series lockset, the lock will respond with 3 RED Schlage button flashes and 3 beeps for any key press or credential presentation.&nb...
CO Reader Modules cannot be replaced by Reader Modules with a different credential type; for example, a magnetic swipe credential reader cannot be replaced with a proximity credential rea...
A Credential Reader MAY be replaced with another Credential Reader of the same type; however, a Factory Default Reset must be performed before the lock will function properly.
Customers will need to use the Schlage Utility Software (SUS) on the HHD lock programming device to set the desired magnetic track to be read for access control, if not using default Track 2&n...
The process to change the Credential Reader on an AD-Series lock is as follows: Note: To ensure firmware compatibility of the lock and reader, it is important that the firmware in the LOCK and the...
Out of the Box, or after a Factory Default Reset, all AD locks can be used in a "Construction Mode".    At launch ...   The AD-Series locks would accept the first card credentia...
Update your device firmware to the latest version to fix this early design / feature update