no tour credentials are not full but says they are

RELATED FAQS

Question
Answer
The NoTour function only allows writing to 11 sectors on the fob.  Each lock added to a user uses 1 sector.  Once those 11 sectors are full, No Tour is not available.  You can ...
Yes, with the may May 3 2021 Engage software and firmware release, no-tour is available for the Schlage Engage Mobile Credentials.   You have to make sure all devices hav...
A reader powered by a USB cable (via a computer's USB port or a powered USB plug) used to enroll smart credentials used in Multifamily access. The reader uses a Wi-Fi connection for enrolling no-...
Out of the Box, or after a Factory Default Reset, all AD locks can be used in a "Construction Mode".    At launch ...   The AD-Series locks would accept the first card credentia...
Update your device firmware to the latest version to fix this early design / feature update
On power-up the CO-Series locksets will provide 5 quick RED Schlage Button flashes and 5 quick beeps to indicate that the electronics (credential reader) has been changed.  In order to recover...
When/If the electronics (Credential Reader) changed on a CO-Series lockset, the lock will respond with 3 RED Schlage button flashes and 3 beeps for any key press or credential presentation.&nb...
CO Reader Modules cannot be replaced by Reader Modules with a different credential type; for example, a magnetic swipe credential reader cannot be replaced with a proximity credential rea...
A Credential Reader MAY be replaced with another Credential Reader of the same type; however, a Factory Default Reset must be performed before the lock will function properly.
The process to change the Credential Reader on an AD-Series lock is as follows: Note: To ensure firmware compatibility of the lock and reader, it is important that the firmware in the LOCK and the...