Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ oh door holder with closer ”

RELATED FAQS

Question
Answer
What are Hold Open Closers & Magnets?
Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions.  Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
Where are hardware templates?
All the templates can be found at us.allegion.com   Please click here
What is a 4430 / 4330?
The 4330 / 4430 is an obsolete ME closer replaced by the 4310ME or 4410ME Series.
In what direction should the hold open nut be pointing for a 4041 H closer, up or down?
Make sure that the hold open nut is not on upside down.  The orientation of the hold open nut depends on the mounting. On a Top Jamb "Push Side" mount, the hold open nut would poi...
Can you replace a regular arm with a hold open with out moving the door closer?
Yes, as long as you stay with the like style arm.  Example: replace an RW/PA with HW/PA, replace an EDA with HEDA, or replace a CUSH with HCUSH.
What do I need to do to make my 4041 Reg/PA a hold open arm?
When placing an order for a 4041/4040XP Rw/PA with hold open, it would be ordered as a 4041 /4040XP Hw/PA. For an existing Rw/PA requiring the addition of a hold open function, a hold open arm woul...
Can you manually pull a 4040SE out of hold open?
The holding force on an SE/ME Series door closer is approximately 35 lbs. and they can be manually pulled out of hold open with approximately 35 lbs of force.