Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately.
If an extended tailpiece is needed, then a complete lock ...
Only the Schlage ND-Series can be prepped to accept non-Schlage cores.
All designs are supplied with the appropriate tailpiece
Non-Schlage cores are NOT included
Lever designs available vary d...
For modular designs:
All functions except ND85 the tailpiece part number is N523-022.
The ND85 tailpiece part number is N523-123.
For non-modular designs:
All functions except ND85 the t...
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage.
If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...
This is usually caused because the wrong tailpiece is being used on non-IC cylinders or the incorrect driver for IC options. Use the below descriptions to identify which they need.NON-IC: There are...