ordering smart cards

RELATED FAQS

Question
Answer
On May 1, 2013 the LM9000 lock was discontinued and replaced with the LM9300 Multipoint Lock. 
The LM9000 mortise lock, door with pre-assembled vertical rods, and frame all ship separately.  The soffit latch, bottom strike, and latch release will ship with the mortise lock, not the...
The part number for the 4041/4040XP HCush arm is 4040XP-3049CNS.
Construction Core Program Policy: Full size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less the handling charge, will be issued upo...
When placing an order for a 4041/4040XP Rw/PA with hold open, it would be ordered as a 4041 /4040XP Hw/PA. For an existing Rw/PA requiring the addition of a hold open function, a hold open arm woul...
A Kerfed Frame is a frame that is formed with an optional integral pocket or recess in the area of the stop to receive gasket, seals or weather stripping. Kerfed frames are available as an&n...
For 33/3549A and 98/9949 cable devices shipped from the factory AFTER 7-15-2016:The door opening height must be specified during order entry. The 33/3549A and 98/9949 cable devices are availab...
 
Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...
Regular LCN closers have "3" regulating valves for General Speed, Latch Speed, and Backcheck. If the LCN closer has "4" regulating valves, then the closer has the Delayed Action feature. De...
The following list summerizes the main differences:  
No this format is not available. This card is and NXP Semiconductor product and is used generally for public transportation, event ticketing & loyalty rewards cards.
It will read Corp 1000 iClass. If it's MiFare, it will not read the Corporate 1000 side of the card. We cannot read HID MiFare secure sector.
To configure an MT20 to enroll 3rd party smart cards via CSN: Use configuration card, part number CE-404-033, "Enable CSN".  The MT20 can then be used to enroll 3rd party smart credentia...
A more intelligent form of proximity card. Proximity readers can only read from a proximity card and not write to it, while smart card technology allows the reader to read/write to the card. In add...
Smart cards can come in two forms: contact and contactless. Contact smart cards operate much like magnetic stripe cards (credit cards, etc.), requiring insertion into or direct contact with a rea...
As of firmware package release AD.A.130 (CT5000 firmware 2.8.0), the CT5000 controller can now support 75-bit PIV card output from a reader.  This makes it compatible with PIV credentials prog...
Smart cards are typically credit card sized, plastic credentials containing a microprocessor chip that serves the dual functions of communication and extensive data storage.  Although it is ...