If the Chexit device shipped prior to 8-24-2015 is not adjusted correctly ( Check vertical rod or Mortise finger) without using the door position switch and nuisance delay is&n...
The following may cause the ALK to go into alarm:
Make sure red and blue wires on the RX switch are connected to the exit alarm ALK terminal block and yellow wire is taped off.
Check the red an...
Followings are the reason for 98/99 exit alarm ALK not sound when push bar is activated.
Make sure key switch on exit alarm ALK is turned on, wait for 20 seconds before you activating the pushba...