Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Panic device size door width ”

RELATED FAQS

Question
Answer
When are Panic Devices required?
The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...
Can a door have an InPact device and glass lights?
Yes, glass light can be used or prepped in conjunction with the Von Duprin 94/95 Series INPACT device however there are dimensional limitations between the glass light and the InPact door preparati...
Glass lights available: Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification. Glass Light Options - Other glass lights are available but ...
Can the 2670 be cut down to fit smaller door widths?
The 2670 Guard X device can't be cut down to fit doors less than 3 feet.  This device is designed to fit doors 36"-48" door width.
What are the maximum door width and height sizes?
Maximum nominal (overall) single door sizes are as follows: L-Series (Laminated Door) 20 Gage = 3’ 0” wide X  8’ 0” high 18 Gage = 4’ 0” wide X 10’ 0” high 16 Gage = 4’ 0” wide X 10...
Can you change 98/9947 WDC device to a 98/9947 hollow metal device?
Yes, for Panic devices only by ordering the top rod kit part #050574, bottom rod kit part #050575, and screw pack #090061. Fire Rated devices can NOT be converted and would require a compl...
How far can a 4ft EL 99R device be cut down to?
EL98/99-4 ft rim device required minimum of 35.2" with 5/8" stop height door opening on single door and 35.56" with 4954/9954 mullion.
What is the narrowest door a 4010 can be mounted on?
When templated for 140° the 4010 will fit on a 16-1/2" door leaf MINIMUM.
What is clear opening width?
Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb.          &nbs...