Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ part number for Schlage lever removal tool ”

RELATED FAQS

Question
Answer
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
Is the blue ND lever tool shipped with each lock?
The blue lever tool remover, 24002693, is not shipped in every box. The existing wire spring lever removal tool will be included in every box.  
How do you remove an AL lock from a door?
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
Are parts still available for the old Falcon M locks?
Only the lever return spring is available.
Related solution: What is the part number for the lever return spring for the old M series mortise lock?
What is the part number for emergency release tool for the D271 / B571?
The emergency keys are shipped with each lock.  The part numbers are; 61-509 standard and 61-510 large bow size.
What is the part number for the lever insert on an AL lock manufactured before May 2002?
A700-015, standard cylinder lever insert.
What is the part number for an ND lever?
ND-series locks manufactured on or after January 30, 2017 use a different levers for cylinders and push/push-to-turn buttons.03-230 - Closed03-231 - Privacy & Cylinder- Schlage KIL (P,L)03-232 ...
ND-series locks manufactured prior to January 30, 2017:03-030 - Closed03-031 - Privacy, Cylinder- Schlage KIL (P,L) & Push or Push & Turn Button03-032 - Schlage FSIC 03- 000 - Schlage ...
Why does the lever on my T lock lever droop?
  Issue: One or both levers don't stay horizontal and droop down.   Facts: Falcon T series locks in a high use application.   Cause: Weak or broken springs within t...
What is the part number for the lever return spring for the old M series mortise lock?
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
What is the part number for the outside trim assembly on L9000 mortise locks?
Outside Knob/Lever and Rose/Escutcheon Assemblies      Part Number  Description    A Rose with Knob/Lever  09-506  Designs: 01 02 03 05 06 07 12 17 18 OME 41 42     09-655  Des...