L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders
L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders
B502-944; Sch...
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...
Schlage offers several Corbin Russwin competitor cams. The left most column in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.
See here for standard ND Keycam part numbers and what functions they belong to.
See here for special ND Keycam part numbers and what functions they belong to.
...
DESCRIPTION
PART NUMBER
Conventional Core
23-030
Conventional Core less logo
23-031
Primus Core
20-740
Primus XP Core
20-740-XP
Primus Core less logo
20-741
...
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys
Part Number
Description
Key Blanks
35-056
Control
Standard bow, embossed both sides
35-076
Standard bow, unembossed both s...
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.
Schlage Cams for Yale 2160
Part Number
Description
B520-7...
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...