Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Parts for EPT ”

RELATED FAQS

Question
Answer
Does Schlage offer a rabbetted latch and strike kit?
Schlage does offer rabbetted latch and strike kit: Part number, 39-030, for cylindrical locks and deadbolts.  Part number, 10-075, for the L9000 mortise locks. Monarch does not offer rabbette...
How do you change a 9130 Benchmark to a 9140 Benchmark?
The only difference between the 9130 and 9140 Benchmark operators are the arms. To convert a Benchmark 9310 (pull) to a 9140 (push), order a 9140-3077 push arm assembly. To convert a Benchmark...
I have an ILCO key what is the Schlage equivalent?
The table below provides the Ilco cross reference to the Schlage keys.  Ilco Identification Section Pins Schlage Part # SC1 C 5 35-100 C SC4 C 6 3...
Is the RX black plug replaceable on Chexit device?
You must replace the entire RX switch assembly for Chexit devices shipped after 8-24-2015 with motor driven.
The part number for the RX switch pig tail (black plug) with two orange wires only for Chexit devices shipped prior to 8-24-2015 with solenoid driven is 991338-00. 
Does the AC rectifier come with a ND electrified lock?
Beginning March 14th, 2016, the electrified ND (ND12EL/EU; ND80EL/EU; ND96EL/EU) begin shipping with a new motor driven design which does not use an AC rectifier. (CAN NOT USE AC VOLTAGE WITH ...
Can a Von Duprin 996L trim be converted to E996L trim?
A E996 conversion kit is required to convert the 996L/L-BE trim to E996L/L-BE electric trim. 050672-00 is the electric conversion kit for 996L rim or vertical rod exit device. 050673-00 is the ...
How do you order a 4110 hold open spring cush arm only?
The 4110 hold open spring Cush (Spring H Cush) arm part number is 4110-3049SCNS.