Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Parts list for CD option ”

RELATED FAQS

Question
Answer
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
What is the CD part number 610106-00
REPLACE WITH 6500059 FOR 17,18,19
Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?
Cylinder dogging (CD) and an RX switch can be ordered together with 33/35 or 98/99 series.
This can be done ONLY with non fire rated exit devices.
Does the cam have to be inverted for cylinder dogging on the falcon 25?
The cam is not inverted on the mortise cylinder for the CD option.
Can the CD and EL options be provided on the same 98 /99 rim or vertical rod exit device?
There is not enough room for both options as the dogging mechanism in a standard cylinder dogging and the electronics for the EL or QEL options are both located at the end of the base plate. For 9...
Is CD an option for the Dor O Matic devices?
Cylinder Dogging(CD) is not an option on any Falcon-Dor-o-matic device.
What does the cylinder suffix BDC mean?
A lock specified by a cylinder suffix BDC will be supplied with a disposable small format construction core, see Figure 1 below.  There is no metal key but instead the BDC cylinder has a ...
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.
How is a bitting list obtained?
A purchase order must by entered through Order Entry. Part number 50-123 for Schlage and 50-123F for Falcon.   Reference the structure number (preferred) or an order num...