Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ pushbar retrofit kit ”

RELATED FAQS

Question
Answer
Are the Pushbar Retrofit Kits (PBKIT) the same for 98/99 and 33A/35A series devices?
A PBKIT is a Pushbar Retrofit Kit.The pushbar retrofit kits are not the same for 33A/35A and 98/99 series exit devices.  Depending on the finish of the exit device, the pushbar end caps are di...
Does the push bar end cap come as a separate item or do you have to order the push bar kit on the 33/35A or 98/99?
The push bar end cap is only included in the push bar replacement/retrofit kit (PBKIT) because the end caps are riveted to the push bar.   
How to order:  specify devise type, size, and finish.  Example: PBKIT 33A 3' US28
Can you field install a RX switch on the 24/25 device?
The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...
Will the EL retrofit kit work on an old style 3347?
The EL retrofit kit will work with an old style 33/3547 exit device.
Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?
You need to order the EL98/9947 or 3'  EL conversion kit.  This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.
Is there an Exit Alarm Retrofit Kit (EAK) for the 19 series?
There is currently an Exit Alarm Kit for the 19 device. It is ordered by description: 19 EAK 3' x Finish 19 HWEAK 3' x Finish (Hardwired version) 19 EAK 4' x Finish 19 HWEAK 4'' x F...
Why does my Chexit device open without sounding the alarm?
If the Chexit device shipped prior to 8-24-2015  is not adjusted correctly ( Check vertical rod or Mortise finger) without using the door position switch and nuisance delay is&n...