Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ QEL CONVERSION PART NUMBER ”

RELATED FAQS

Question
Answer
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?
The Von Duprin EL33A/35A/98/99 device can be converted to the QEL device by getting the correct sized QEL baseplate conversion kit. The existing PS914 or PS873 power supply can be used. ...
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
What are the part numbers for the new Falcon T latches?
 Falcon T Lock Latch Conversion Table       Effective mid-June 2013  Old Part Number   New Part Number       ...
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number   &nb...
What back plate conversion kit is required for the 88 with the 373L trim?
Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart
What is the part number for the HD EL conversion kit for Von Duprin devices?
HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.
Available kits to convert classroom mortise locks to classroom security locks.
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...
What is the part number for QEL94/95 inpact conversion kit?
The part will be configured as CONVERT.XXXX part numbers. The customer need to specify the following criteria. Required:   Series 94 or 95, Fire or Panic , 3 feet/4feet or 2 feet 6 inches/2 feet...