Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ QEL field installation kit ”

RELATED FAQS

Question
Answer
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
What is the minimum dimension from the edge of the door to a glass light cutout?
Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...
Can you add SD and EL to a mechanical 99 series exit device?
This is available.  You will need the SD center case kit, SD center case cover, SD cylinder dog housing, and EL/QEL conversion kit.
Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?
The Von Duprin EL33A/35A/98/99 device can be converted to the QEL device by getting the correct sized QEL baseplate conversion kit. The existing PS914 or PS873 power supply can be used. ...
Does Von Duprin offer replacement QEL motors?
See below for part numbers:  114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit w/Connectors 958002-00 HD-QELA Mod. Conv. Kit 040062-00 HD-QELA M...
Can QEL and RX be added to an existing 9927?
The QEL conversion kit (3' or 4') and the RX switch kit (050251-00) can convert the 9927 to QEL-RX9927 device.
Is there a conversion kit to make 94/95 devices into a QEL?
Yes.    Required   Series 94 or 95 Fire or Panic 3FT/4FT or 2 ft 6 in / 2 ft 10 in Finish    Optional LX switch &nbs...