Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ qel module converstion kit ”

RELATED FAQS

Question
Answer
Is there a conversion kit to make 94/95 devices into a QEL?
Kits are available per the following criteria.    Product Bulletin Required Series 94 or 95 Fire or Panic 3FT/4FT or 2 ft 6 in / 2 ft 10 in Finish  Optional LX...
Is the Von Duprin Chexit part number 050228 a module or a kit?
The circuit board is sometimes referred to as a "module" in the field.
Does Von Duprin offer replacement QEL motors?
See below for part numbers:  114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit w/Connectors 958002-00 HD-QELA Mod. Conv. Kit 040062-00 HD-QELA M...
What is the part number for QEL94/95 inpact conversion kit?
The part will be configured as CONVERT.XXXX part numbers. The customer need to specify the following criteria. Required:   Series 94 or 95, Fire or Panic , 3 feet/4feet or 2 feet 6 inches/2 feet...
Can QEL and RX be added to an existing 9927?
The QEL conversion kit (3' or 4') and the RX switch kit (050251-00) can convert the 9927 to QEL-RX9927 device.
Is there a Von Duprin conversion kit to change mechanical to electric latch retraction EL in the field?
Followings are the list of the electric latch retraction EL/HDEL (hex dogging), QEL (quiet) kits: 114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit...
Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?
The Von Duprin EL33A/35A/98/99 device can be converted to the QEL device by getting the correct sized QEL baseplate conversion kit. The existing PS914 or PS873 power supply can be used. ...
Will there be 900-2Q boards for warranty purposes now that the QEL'S do not require the boards?
The 900-2Q board is no longer available. For warranty purposes, QEL conversion kit and 900-2RS board are required. The 900-2RS replaces the 900-2Q board.