read range ad

RELATED FAQS

Question
Answer
All read ranges are affected by the environment the reader and card are subjected too.  The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...
All read ranges are affected by the environment the reader and card are subjected too.  The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...
The Schlage AD/CO trims are not compatible with the Falcon 25-V device due to the main cam on the device rotating the opposite direction for a given hand compared to the AD/CO trims output dri...
The FMK reader on an AD Series lock is capable of reading PIV and PIV-I credentials, however, alone it no longer complies with the new FIPS 201-2 standard in which the lock with reader (AD-302 and ...
See attachment for details: Proximity readers support
See attachment for details: Magnetic Swipe reader supports:
See attachment for details: Smart readers support:
Customers will need to use the Schlage Utility Software (SUS) on the HHD lock programming device to set the desired magnetic track to be read for access control, if not using default Track 2&n...
All Keypad ONLY credentials with firmware versions between 2.9.2 and 2.11.0 should be updated to the latest firmware available at www.schlage,com/support.
A firmware issue with Keypad ONLY credential firmware, versions 2.9.2 through 2.11.0 and manufactured between 9-9-2010 and 1-5-2011 will exhibit poor battery life.
The Keypad ONLY credential Reader (KP) can prevent the reader from entering its low power sleep mode - with firmware versions 2.9.2 through 2.11.0
A Technical Note has been generated to document one method of measuring battery current. See the attachment HERE.
All Schlage/XceedID wiegand proximity readers currently understand: -ASK (Amplitude Shift Key) - Used in GE/CASI -FSK (Frequency Shift Key) - Used in HID Prox, AWID, and Lenel The third proximit...
ISOX card technology is no longer supported - contact XceedID sales
The process to change the Credential Reader on an AD-Series lock is as follows: Note: To ensure firmware compatibility of the lock and reader, it is important that the firmware in the LOCK and the...