Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ recessed door pulls ”

RELATED FAQS

Question
Answer
Did Falcon ever make a lock for elevator doors?
Falcon manufactured an EZF101 which was a large plate with a recessed lever for use in elevators.  This item is no longer available.     
What would cause an EL device to pull and release?
If your Von Duprin EL (solenoid) device pulls and releases quickly instead of holding the latch retracted, please check all of the items below.In most cases, one or more of these solutions will r...
Can you manually pull a 4040SE out of hold open?
The holding force on an SE/ME Series door closer is approximately 35 lbs. and they can be manually pulled out of hold open with approximately 35 lbs of force.
What are Pneumatic Automatic Operators?
 Pneumatic Automatic Operators are used in areas where electrically operated devices are not convenient or permitted.  Consists of a modified, heavy-duty door closer for manual oper...
What does the term "Reveal" mean?
Reveal is the distance or measurement from the face of the door out to the face of the frame on the push side of the door.Other related terms:Door face - The exposed surface of door visible wh...
Can a 4041 EDA be mounted top jamb?
The 40401/4040XP closer with optional EDA arm has to be mounted parallel arm on the push side of the door.
How do you mount an LCN door closer on an arched or radius door?
What side of the door is the 4040SE mounted?
The 4040SE is non handed and can be mounted on the push or pull side of the door.
Can a pull side mounted 1460 open 180°
A 1460 Pull Side can be mounted standard template for 180°, frame and trim permitting.
A 4030 Pull Side can be mounted standard template for 180°, frame and trim permitting. 
A 1260 Pull Side can be mounted standard template for 180°, frame and trim permitting.
What is the model number for the Ives door edge pull?
The sliding door edge pull is part number 230.
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
Can you install a 4041 pull side at 180 degrees?
The maximum opening is 120° with the 4041/4041XP standard templating on the pull side of the door.
What are the dimensions for mounting a 1261 on the pull side of the door
http://lcnclosers.com/pdfs
What is the narrowest door a 4040 pull side will mount on?
14" door leaf is the narrowest with standard template.
Can you mount a 4011 as a parallel arm like the 4111?
The 4011 can only mount on the Pull Side of the door and the 4111 can only mount on the Push Side of the door. Differences - The 4011 and the 4111 cylinders are different and the pinion shafts are...