Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Rehanding mortise L series ”

RELATED FAQS

Question
Answer
Can you order the Schlage L series mortise lock with knob on one side and lever on the other?
You can order an L lock with a lever on one side and knob on the other as long as it's still rose by rose, or escutcheon by escutcheon (must be same style escutcheon). EXCEPTIONS: Knob trim o...
Includes the SL1 lever on one side and the SK1 knob trim on the other side.
What parts are needed to install an L lock on an 1 3/8" door?
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped.  The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...
Is there a round corner armor front for the L series mortise lock?
The L series armor fronts are only available with square corners.  
Is the L-Series mortise lock UL rated?
UL Listed for 3-hour fire door (except L9076 and L9077)
How long does it take to install a L Series mortise lock?
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes.  Many outside variables can change the amo...
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference:  
What are the part numbers for the inside and outside knobs for the L series?
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish
What is the part number for the L series handing screw?
Screw part number is L583-485.  Screw type: 8-32 UC-2A W/#6 Flat truss head Phillips recess, header point.