Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rex kit part number ”

RELATED FAQS

Question
Answer
What is the part number for the EAK PCB only for Monarch Falcon devices?
PCB only for the Alarm Kits prior to June 11th, 2012 is part #650335 and was used in the older 17 & 18 devices, 19, & pre June 2012 24/25's.
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.
Is there a Schlage modular cylinder sales kit?
Schlage has released a modular cylinder sales kit, part number 40-224.  It's contents and information can be found here.
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
What is the part number for the HD EL conversion kit for Von Duprin devices?
HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.
What is the part number for the Von Duprin maintenance kit?
Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
What back plate conversion kit is required for the 88 with the 373L trim?
Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart
Can a Von Duprin 996L trim be converted to E996L trim?
A E996 conversion kit is required to convert the 996L/L-BE trim to E996L/L-BE electric trim. 050672-00 is the electric conversion kit for 996L rim or vertical rod exit device. 050673-00 is the ...
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...