Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim exit key lock ”

RELATED FAQS

Question
Answer
What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...
I can not remove the key from the cylinder on my BE365 deadbolt lock.
After rotating  the key to unlock the lock, you must return the key to its normal position to remove it. 
Why does my 7500 retract the latch bolt but not re-lock the trim?
The Von Duprin 7500 mortise lock body ships in the NL mode.  Either the function of 7500 lock body has not been changed to the Classroom function or the NL Drive screw is not all the way down. Step...
  Tips for changing the function: The NL Drive screw will not be visible when lock body is set to Classroom function There is locktite on the screw that makes it seem like its turned down enou...
Does Schlage make a mortise lock that the lever on either side retracts the latch and a key on either side retracts the deadbolt?
The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt ...
Can the NL key override be used on Chexit Rim or Vertical Rod devices?
The NL key override will not open the door while Chexit rim or vertical rod device is in the arm mode.