Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Rod guard for monarch ”

RELATED FAQS

Question
Answer
How long is the RGO?
The RGO (rod guard only) is 36" long x 1-5/8" wide.
Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
Are 1 piece top rods available for a 24V or 25V device?
As of August 3rd, 2011 this is no longer an option.
What is the part number for the former F588 from Monarch?
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
Why should you use the LX switch with an ALK being used in Von Duprin surface vertical rod devices?
You should use the LX switch with the Von Duprin surface vertical rod exit device because the rods are exposed and are vulnerable to attack. IE, the top rod can be grasped and forced down to retrac...
Can RG-27 be used on a top rod?
Yes, you could use the RG27 on top rod but we recommend RGO. The RG27 is a latch and rod guard and the RGO is a rod guard only. A latch guard is not needed for top latch, only for bottom latch.
What is the Falcon cam designation for use on 25 series trims?
For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam 
What strike is required when using the 2670 Guard-X on a pair of doors?
With a mullion: Use the standard strike 267 With no mullion and inactive leaf being held closed with flush or surface bolts: Use the 2609 double door strike