Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rotating key lock cylinder ”

RELATED FAQS

Question
Answer
What does the hotel indicator look like for the A, AL, D, and ND?
Indicator not extended Indicator extended
The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed.  When this pin is ...
What is a Primus lock out cylinder?
When you want to periodically disable and block access to a certain room in a building or an entrance door, that’s when you would need to use a Lockout Cylinder. See full document.
Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
I can not remove the key from the cylinder on my BE365 deadbolt lock.
After rotating  the key to unlock the lock, you must return the key to its normal position to remove it. 
Will a Medeco key-in-lever cylinder fit into an ND lock?
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...