Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rubber tip door stop tip ”

RELATED FAQS

Question
Answer
What is the part number for the rubber tip for an Ives hinge pin door stop?
Model 69 the part number is 09-310Model 70 & 73, the part number is WSPART.1075
How do I get service on my Astro Swing operator that isn't working properly?
LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...
What is the AL Jupiter lever return to the door?
1.20 inches
What is the size of the Levon lever in the A series?
See the Levon lever below, Figure 1. Figure 1: Levon dimensions
  The door face to lever tip distance is 1 3/8"
What is the door-to-lever tip distance on the S Jupiter lever?
The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4".
Door hitting the strike jamb?
If the door hits the frame (or rubs on the rabbet of the head or jamb) the frame is out of square and improperly installed. Door edge rubbing on the rabbet - shimming the hinges may resolve the...
Does the Ives 482 Door Guard come with a rub plate?
The Ives 482 does not come with a rub plate.  The brass 482 Door guard (also called 482B) comes with an edge guard or plate that is applied with adhesive to protect the edge of the door.T...
What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?
  For Product Shipped Prior to August 2012 using the old (black) potted module: a.       0-100 ft 14 gauge wire b.      0-200 ft 12...