Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ RX switch installation on ALK ”

RELATED FAQS

Question
Answer
Can you field install a RX switch on the 24/25 device?
The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...
Can a 55 or 88 series device have a request to exit switch?
The Request for Exit (RX) is available on the 55 and 88 Series Von Duprin devices.The RX switch is installed in the end case of 55 and 88 series exit devices.There is no kit to field install the RX...
Does a Von Duprin ALK kit come with an RX switch?
ALK kit comes with standard RX switch. It can be ordered without the RX switch or with LX switch as an option.
Does the Von Duprin ALK require the RX switch to operate?
The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...
Explain the ND80 function.
The 80 (Storeroom function) operates as follows: Key retracts latch (entrance by key only)
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
Does the ND lock have an RX option?
The ND lock is available with an RX option:When ordering a complete ND lock specify RX when the request to exit (RX) switch is required.The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12EU electrifie...