Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rx switch kit ”

RELATED FAQS

Question
Answer
What is the part number for the CX-RX switch?
For motor driven Chexit devices shipped from the factory after 8-24-2015, the RX switch is standard, part number 116717-00.    
For solenoid driven Chexit devices shipped from the factory prior to 8-24-2015, the RX switch is ordered as a "Special CX-RX switch" by SSC or distributors.  The switch may only be installed o...
Does a Von Duprin ALK kit come with an RX switch?
ALK kit comes with standard RX switch. It can be ordered without the RX switch or with LX switch as an option.
Can you field install a RX switch on the 24/25 device?
The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
Do we offer a RX switch for the 17 or 18 device?
This option is not available.  The 17 & 18 Series devices were discontinued in August 2009 and the new Falcon RX Switch is mounted to a bracket that fits in the pushpad...
Can QEL and RX be added to an existing 9927?
The QEL conversion kit (3' or 4') and the RX switch kit (050251-00) can convert the 9927 to QEL-RX9927 device.
What is the part number for the EAK PCB only for Monarch Falcon devices?
PCB only for the Alarm Kits prior to June 11th, 2012 is part #650335 and was used in the older 17 & 18 devices, 19, & pre June 2012 24/25's.
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.