Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sargent exit cam ”

RELATED FAQS

Question
Answer
Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
 A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
The cylinder cam must be inverted with the SD option to work properly.
What cylinder is used in the Falcon 24/25 exit alarm kit?
The Exit Alarm takes a 1 1/8" Mortise cylinder with a straight cam. See first page of Exit Alarm inst below. Exit Alarm inst
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.
What cylinders are used to operate Von Duprin devices?
2021 Update: An updated version of this knowledge entry can be found by clicking HERE.       Part numbers for Schlage and Falcon cylinders for Von Duprin device...
  FALCON   Mortise Rim KIL Conventio...
    If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed.   In order to determine cylinder type n...
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
Can you use lever trim on a 19V-EO without getting any additional parts?
The Exit Only (EO) device will accept any 19 Series trim as the main cam for the trim input is always put on the device center case.
How do you change the Von Duprin 990TP trim to NL function?
Recommend to order a new 990NL-R/V or M trim to change from TP/Classroom function to NL/Storeroom function. You will also need to reinstall the NL drive screw back into into the mast...
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...
What cylinder do I use on a Von Duprin Keyed Removable Mullion?
Von Duprin KR (key removable) mullions requires a 1-1/8" or 1-1/4" mortise cylinder with the standard straight cam, the cam is not inverted. Please see chart below for part numbers. 
instructions