Most key blanks have to be ordered in multiples of 50.
Exceptions listed below:
Classic and Primus Large Bows
Classic and Primus Access Bows
All Control Keys
All Emergency Keys
Primus Locko...
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder. The kit includes the following:
(1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100
(...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus.
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys
Part Number
Description
Key Blanks
35-056
Control
Standard bow, embossed both sides
35-076
Standard bow, unembossed both s...
HIGH SECURITY
Primus/Primus XP: In addition to six cuts for standard locking mechanism, there are five side finger pins to operate the secondary sidebar lock. Primus keys will operate non-Pri...
Yes, a filler plate can be used to cover an EPT prep as long as it is made from the same material as the frame.
This information can also be found in NFPA 80 under Chapter 5 for Field Modifications.
There are several Schlage and/or Falcon locks that have been tested and approved for this application.
For Commercial use the locks have been tested and approved as ...