Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
SCHLAGE CAM FOR FALCON EXIT DEVICE
”
RELATED FAQS
Question
Answer
What cylinder is used in the Falcon 24/25 exit alarm kit?
Resolution:
The Exit Alarm takes a 1 1/8" Mortise cylinder with a straight cam. See first page of Exit Alarm inst below. Exit Alarm inst
Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
Resolution:
A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
Resolution:
The cylinder cam must be inverted with the SD option to work properly.
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Resolution:
Schlage now offers modular style cams to operate the Falcon MA locks. The following part numbers are cams for all MA locks (except the MA381): L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Resolution:
Price Book 72A List Price $8.10
Does the cam have to be inverted for cylinder dogging on the falcon 25?
Resolution:
The cam is not inverted on the mortise cylinder for the CD option.
What is the Falcon cam designation for use on 25 series trims?
Resolution:
For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Resolution:
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device.