Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage cam for von duprin ”

RELATED FAQS

Question
Answer
What cylinder is needed with Von Duprin exit alarm ALK?
The ALK uses a 1 1/4" mortise cylinder with straight cam. (NO DOGGING)
What is the standard FSIC mortise housing with a straight cam?
20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...
Does the cam have to be inverted for cylinder dogging on the falcon 25?
The cam is not inverted on the mortise cylinder for the CD option.
What cylinder do I use on a Von Duprin Keyed Removable Mullion?
Von Duprin KR (key removable) mullions requires a 1-1/8" or 1-1/4" mortise cylinder with the standard straight cam, the cam is not inverted. Please see chart below for part numbers. 
instructions
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
 A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
The cylinder cam must be inverted with the SD option to work properly.
What is the part number for a Schlage cam to operate a Corbin lock?
Schlage offers several Corbin Russwin competitor cams.  The left most column  in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...
What is the correct cylinder cam # for 718C for a concealed vertical rod device?
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Pr...
Use Schlage B520-295 cam with the Falcon 986 conventional cylinder. Use Falcon A12667-013-00 with the Falcon C987 SFIC housing.