schlage keypad lock


Check that the reader is fully seated into the front escutcheon.
Check that there are no bent pins in the reader connector.
Check that the through door ribbon cable is properly plugged in.
Check that the battery or wired power is properly connected.
Check that the batteries are inserted into the battery holder in the correct polarity orientation.
Locknetics company supplied electro-magnetic locking devices, electronic smart locks, and electronic security components to access control dealers and lock smiths.  Ingersoll-Rand acquired ...
No, we do not recommend using a keypad lock on your gate. Although the keypad side is meant to be on an exterior door, the interior side of the lock should not be exposed to weather. Any exposure t...
Follow normal FDR procedure, but press and hold Schlage button down for 3-5 seconds instead of pressing and releasing it
-         With the CIP NOT inserted and the Schlage Utility Software (SUS) running o   Enter the Master Programming PIN or Present Loc...
Ensure when pressing and holding the Schlage logo it is the one located above the numbers 1,2 and 3 on the keypad and NOT the inside Schlage alarm button.