Cleaning and caring for the lock will vary depending on the finish.
Clear-coated or oil rubbed finishes can be cleaned periodically with a mild non-abrasive soap and buffed lightly with a clean ...
To clean the platen on a hand reader, apply a Windex-like product with a clean, soft cloth and allow it to air dry. The hand reader platen overlay has an anti-microbial surface. Should ...
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...
The 6211 would be the most common electric strike to be used with cylindrical locks on a single door application. Check the template to confirm compatibility with specific cylindrical lock model n...
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD
GD = Schlage SFIC core
HD = Construction core
BD = Less core
BDC = Plastic temporary construction core
The standard out-of-the-box ND lock will fit the following door ranges:
All functions except ND85 will fit onto a door 1 5/8" through 2 1/8" extended equally.
The ND85 will fit on doors fro...