Finish is not specifically stated as being covered under warranty as it is covered under defects in material and workmanship. EXCEPTION: There is no finish warranty for Falcon products. ...
Please contact the Allegion Product Support Team on all questions or inquiries pertaining to hardware finishes warranties. Please send an e-mail to the applicable Product Support team:Closers_TechP...
Warranty Statement3 Year Limited Mechanical Warranty and
1-Year Limited Electromechanical Warranty - Additional warranties listed below
The provisions of these limited warranties do not apply
to P...
Conversion kits are available to convert many popular functions.Conversion kits manufactured on or after January 30, 2017 will have the new enhanced ND spring cage, lever, plunger and buttonCo...
For all available ND Series Conversion Kit part numbers, click here.
The 900-2Q board is no longer available.
For warranty purposes, QEL conversion kit and 900-2RS board are required. The 900-2RS replaces the 900-2Q board.
Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom. ...
DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, bl...
Minimum dimensions to cutouts for glass lights:
Vertical edge of door to edge of cutout = 5 29/32"
Top of door to top of cutout = 6"
Bottom of door to bottom of cutout = 10"
Reinforcing chann...
The date stamp on a 4041/4040XP is on the packing nut. The date will be the week of the year and then the year.
EXAMPLE: 10 05 would be week 10 of 2005. For example see...
Warranty on the HHD is one (1) year from date of purchase.
The battery for
the HHD (Bluebird Pidion) is covered under warranty. However, as
the batteries are not available s...
Falcon has a 10 year warranty for its portfolio of locks. The new warranty is in effect for all locks purchased since November 1st, 2008Electronics/electrified functions will h...
The warranty on the PS900 Schlage Electronics Power Supplies is 12 months from date of manufacture. The warranty is only valid for a true manufacturing defect in the power supply. Any customer dama...
Von Duprin warrants that the product manufactured by it and delivered here under will be free of defects in material and workmanship for a period as follows:
Exit devices and trim for 36 months...
Steelcraft offer a limited warranty to customers that products will be free from defects in the material and workmanship for a period of 12 months from date of shipment of products.Warranty St...
Job Specific Warranty - If job specific warranty letters or certificates are required, please refer to the Allegion Contact Us web page and request the applicable information.NOTES:F...
We warrant only to Customers that Products will be free from defects in material and workmanship for a period of 12 months from the date of shipment of the Products. There is also an extended...
Job Specific Warranty - If job specific warranty letters or certificates are required, please refer to the Allegion Contact Us web page and request the applicable information.NOTES:F...
ALL AD and CO products are warranted for electrical for 1.0 year after installation OR 2.0 years after manufacture.
The mfg date is on the lock stickers AND can be viewed electronically with th...
Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to be used with a s...
Medeco does offer a key-in-lever cylinder to fit the Schlage ND.You will need to contact Medeco for the cylinderSpecify a key-in-lever cylinder to fit the Schlage ND lock.They will supply a cylinde...