Steelcraft offers all the standard lights as well as special size glass lights in the H-series door. Effective April 1, 2012, (Bulletin # B-100.12) the default for Dezigner Trim in H-S...
For hurricane applications, seamless edges are available as an option:
H-Series doors are available with optional seamed filled (HF) seam welded (HW) door edges.
HE-Series doors are a...
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications?
The only approved latching hardware for inactive leaf of pairs w...
The L-Series doors are designed for virtually all construction requirements in commercial building applications. They have also been tested and approved for uniform wind load per ASTM E330.
...
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently
Medium duty
Commercial, government or multi-...
Maximum nominal (overall) single door sizes are as follows:
L-Series (Laminated Door)
20 Gage = 3’ 0” wide X 8’ 0” high
18 Gage = 4’ 0” wide X 10’ 0” high
16 Gage = 4’ 0” wide X 10...
Yes, Steelcraft does offer optional A60 and A40 Galvannealed, and G90 Galvanized steel on doors and frames.
Galvannealed A60 and A40:
A60 coating designation - optional on all doors and frame...
To determine Actual Door Size, the following values are subtracted from nominal door size (frame opening/order size)
Actual Door Size: The largest measured width by height of the door leaf as m...